Purivox Carousel Spare Parts
Buy Purivox Carousel spare parts now online at Purivox! We offer quality products since 1950. Extend the lifespan of your device with high-quality original parts!
For the operation of all Triplex devices you need two of the block battery type 4R25 6Volt.Scope of delivery consists of 1x battery. For the operation of the Purivox gas cannons, you need 2x batteries. Delivery only possible within Germany and outside the EU. Notice on Disposal of Old Batteries
The battery lead gel 12V 3,4 Ah is designed for the Purivox bounce suppressors: Triplex V , Carousel Triplex V , Razzo Triplex V .The delivery also includes a connection cable to connect the battery to the control unit and a holder to remove the battery more easily from the electronic unit.Dimensions: 13.5 x 7 x 7 cm(length x width x height in cm)weight: 1,5 kg
Purivox 24h time switch 12V DC for the Purivox bang quenching devicesThe timer is a special clock with an extremely low power consumption to achieve the longest possible operating life.
Bracket for electronic unit CS & RZ Triplex V complete
Board Uplexa 19Dimensions: 8 x 3 x 2,8 cm(length x width x height in cm)weight: 0,22 kg
Electronic unit for Purivox Carousel Triplex V 3 - multiple shot for effective expulsion (frighten - fly up - fly away) irregular firing sequences. No habituation due to 4 time ranges with random number control. Timer built-in. Freedom of operation, further irregularities programmable, defined switch-on and switch-off times. Optimised power consumption. Long-term operation without battery change Weatherproof housing. Avoidance of disturbances caused by rain or condensation. The microcontroller control doses the propane gas via the solenoid valve into the firing chamber, the ignition then takes place by means of high voltage.All components are moisture-protected and optimized in power consumption for a long service life. Power supply via 2 6 Volt 4R25 batteries. Which are not included.Dimensions: 21 x 15 x 15 cm(length x width x height in cm)weight: 1,4 kg
Spacer plate for control boarddimensions: 13,8 x 3 x 0,2 cm(length x width x height in cm)weight: 0,02 kg
battery contact plate with cable for electronic unit
Plastic housing with cover / thrust pieces
Cover for Purivox electronic unit for use with ball pressure pieces.When used as a replacement for cover with groove, you need 4 x ball pressure pieces to fix the cover on the old housing.You can order the ball thrust pieces hereArt.No. 108335.You can find conversion instructions and drill sketch here.
Cover for Purivox electronic unit with permanently installed 2W solar module to power the battery (battery must be purchased separately). Use ONLY with the Purivox Carousel Triplex V models (Not to be used with the Purivox Triplex V).
Light sensor day / night switch for Uplexa19
Light sensor day / night switch for Uplexa19
Gas hose for betweenRegulator - Double nippleandDouble nipple - electronic unit
Gas hose drain 850 mm ( CS + RZ ) Weight: 0,02 kg
Please note that all Purivox gas cannons may only be operated with this gas pressure regulator, as it has special properties which a standard gas pressure regulator (gas grill or radiant heater) does not have!
Purivox Gas pressure regulator POL (international) Please note that all Purivox gas cannons may only be operated with this gas pressure regulator, as it has special properties which a standard gas pressure regulator (gas grill or radiant heater) does not have!
Purivox Gas pressure regulator SHELL (swiss) Please note that all Purivox gas cannons may only be operated with this gas pressure regulator, as it has special properties which a standard gas pressure regulator (gas grill or radiant heater) does not have!
Purivox gas regulator SHELL with grommet, union nut and gas hose.Suitable for swiss gas cylinders Please note that all Purivox gas cannons may only be operated with this gas pressure regulator, as it has special properties which a standard gas pressure regulator (gas grill or radiant heater) does not have!
Purivox gas regulator POL with grommet, union nut and gas hose.Suitable for international gas cylinders Please note that all Purivox gas cannons may only be operated with this gas pressure regulator, as it has special properties which a standard gas pressure regulator (gas grill or radiant heater) does not have!
Purivox gas regulator KLF with grommet, union nut and gas hose.Suitable for German gas cylinders Please note that all Purivox gas cannons may only be operated with this gas pressure regulator, as it has special properties which a standard gas pressure regulator (gas grill or radiant heater) does not have!
Hose nozzle for gas pressure regulator KLF
