Mounted noozle sprayers

The Varidome Mini Herbicide Spray Head is equipped with a flat spray nozzle and allows for clean and precise weed control directly next to or between crops, thanks to its complete shielding. The unique feature of the Varidome Mini Herbicide Spray Head lies in its complete shielding, which can be rotated to any width due to the round mount, offering full flexibility. When rotated to full width, the Varidome spray head has a spray width of approximately 45cm, and when rotated to the narrow side, it is 5cm. Application areas of the Varidome Mini Herbicide Spray Head are: Vegetable farming Tree nurseries Christmas tree plantations Fruit farming Special crops and more. The shielding of the spray head is made from impact-resistant plastic, with a slightly softer rubber flap at the bottom. By using conventional nozzles, the Varidome Mini can be used with any tank unit/sprayer, allowing for easy retrofitting. Due to its very low weight, installation is very simple. When used on uneven surfaces, we recommend adjusting the spray head to the proper height using a parallelogram/frame wheel.

 With the Spraydome shielded herbicide spray heads, weed control on strawberry dams is extremely easy. The great advantage of the complete shielding is perfected by the spray head rotating independently on the foil dam. The spray domes are always equipped with two flat jet nozzles to maintain the entire width.By using the Spraydome spray heads there are many advantages which make the Hebizid weed treatment of strawberry dams much easier and faster:     Easy handling     Compact and easy mounting     Independent leadership at the dam     No damage to the foil due to rotating shielding     different spray head sizes (Ø40cm and Ø60cm)     Can be used with existing syringe / tank unit Why many of our customers are so enthusiastic about the Spraydome spray heads is surely due to the easy handling and the fact that the relatively soft side of the Spraydome head is pressed against the dam by a spring mechanism. The entire shielding (yellow unit) can be rotated freely and thus always rotates at the same speed as the vehicle, which means that no damage is caused to the foil dam.Two heads are always used per row (left and right spray dome unit). The two spray domes spray heads are adjusted to the distance between the dams so that the complete area between the dams is treated. Due to the spring mechanism also small unevennesses are treated, because the spray dome spray head always fits neatly to the dam.For an optimal result, we always recommend the use of a parallelogram / guide wheel to maintain a constant distance to the vegetation / soil.     Spraydome Herbicide Spray Head Sizes:Spraydome Ø400 left nozzle (art. no. 132040)Spraydome Ø400 right nozzle (art. no. 132041)Spray domes Ø600 left nozzle (art. no. 130956)Spraydome Ø600 right nozzle (art. no. 130955)

The Varidome herbicide spray head is equipped with a flat spray nozzle and allows for a clean and precise weed treatment directly next to or between crops due to its complete shielding. The special feature of the Varidome herbicide spray head lies in the complete shielding, which can be rotated to any width due to the round design, thus allowing full flexibility. When turned to full width, the Varidome spray head has a spraying width of approximately 80 cm, and when turned to the narrow side, it is 8 cm. Application areas of the Varidome herbicide spray head include: Vegetable farming Nurseries Christmas tree plantations Fruit farming Special crops etc. The shielding of the spray head is made of impact-resistant plastic, which has a slightly softer rubber flap at the bottom. By using conventional nozzles, the Varidome can be used with any tank unit/sprayer, allowing for easy retrofitting. The installation is very simple due to its lightweight design. For use on uneven surfaces, we recommend adjusting the spray head height with the help of a parallelogram/guide wheel.

The shielded Undavina herbicide spray nozzles are designed for clean and easy weed control up to the culture plant itself.Due to the shielding of the Undavina, the risk of drift is minimized. With the special suspension system, spraying can be done on stable crops such as blueberries, grapevines, fruit trees, and many more. (For blueberries, the plants must be strong enough so that the Undavina does not break branches when in direct contact with the plant.)The biggest advantage of the Undavina herbicide spray nozzles is the complete shielding for treatment right up to the culture plant. In the standard version, the shielding is achieved by the black "brushes." These brushes prevent drift and cause no damage to the culture plant.This type of drift protection, however, is only usable on grapevines and in fruit growing. When used in low crops such as blueberries, an additional tarpaulin shield, which is placed over the entire Undavina spray nozzle, must be used.The Undavina herbicide spray nozzles are equipped with a double flat spray nozzle that covers the full spray width.Additionally, it is also possible to equip the Undavina with a rotary atomizer (CDA / ULV). The advantage of the CDA variant is that, due to the low dilution of the herbicide (1 part herbicide to 3-5 parts water), a large area performance can be achieved.If you have any further questions regarding the Undavina herbicide spray nozzles in CDA or nozzle version, feel free to contact us. Undavina Herbicide Spray Nozzle Sizes: Undavina Ø400 Left Nozzle (Art. No. 131025)Undavina Ø400 Right Nozzle (Art. No. 131020)Undavina Ø600 Left Nozzle (Art. No. 131035)Undavina Ø600 Right Nozzle (Art. No. 131030)Undavina Ø900 Left Nozzle (Art. No. 131045)Undavina Ø900 Right Nozzle (Art. No. 131040)

The shielded Sprayflex herbicide spray nozzles are used for clean and easy weed control right up to the crop plants. Due to the shielding of the Undavina, the risk of drift is minimized. With the special suspension, spraying can be done on stable crops such as blueberries, grapevines, fruit trees, and many others. (For blueberries, the plants must be strong enough that the Undavina does not break any branches on direct contact with the plant).The greatest advantage of the Sprayflex herbicide spray nozzles is the complete shielding for treatment right up to the crop plant. In the standard version, shielding is achieved through the black "brushes". These brushes prevent drift and cause no damage to the crop plant.However, this type of drift control is only suitable for grapevines and fruit farming. When used in low crops like blueberries, an additional tarpaulin shielding must be used, which is placed over the entire Sprayflex spray nozzle.The Sprayflex herbicide spray nozzles are equipped with a double flat spray nozzle, which sprays the full width of the nozzle. Furthermore, it is also possible to equip the Sprayflex with a rotational atomizer (CDA / ULV). The advantage of the CDA version is that, due to the low dilution of the herbicide (1 part herbicide to 3-5 parts water), a large area performance can be achieved.If you have any further questions regarding the Sprayflex herbicide spray nozzles in CDA or nozzle versions, please feel free to contact us. Undavina Herbicide Spray Nozzle Sizes: Sprayflex Ø400 Nozzle (Item No.)Undavina Ø400 Nozzle (Item No.)Undavina Ø900 Nozzle (Item No.)Note: The lift cylinder visible in the images is not included in the standard delivery. Advantages of Sprayflex: Easy handling Compact and lightweight assembly Self-returning of the spray nozzle to the crop plant No damage to the plant due to rotating shielding Various nozzle sizes (Ø40cm, Ø60cm, and Ø90cm) Compatible with existing sprayers/tank units Suitable for front mount, rear mount, and between row areas The Undavina herbicide spray nozzles provide efficient protection for crop plants against various weeds.