Changing the timer from analogue to digital
These instructions will help you to install and connect your new digital 12V timer for a Purivox gas cannon. Please follow each step carefully.
- remove the old cables from the built-in timer using a small screwdriver.
- remove the built-in timer by pulling the small white tab away from the timer and lifting it carefully
- connect the cables to the new digital timer as shown on the diagram below.
- cables 1 and 2 are for the ON/OFF switch
- connect cable 3 to slot 3 of the time switch
- cable 4 together with cable 6 (brown) to slot 4
- cable 5 (blue) to the GND slot
- now carefully plug the time switch back onto the mounting rail
To
set the time switch, you can either do this directly via the time
switch or using the Save*n Carry app. You will need an NFC-enabled
smartphone for this.
If you need help with the setting, please do not hesitate to contact us.